Constant curvature vertical array enclosure
The Vector V10 is a 3-way compact full range constant curvature vertical array enclosure. It features physically time aligned components and internal passive network for single amplifier channel operation. A custom waveguide ensures smooth sonic crossover between enclosures.
• Components: 10″/2×5″/2×1″
• Directivity: 110° x 10°
• Max SPL: 137 dB
• Weight: 22 kg
The Inspired Audio Vector V10 is a constant curvature, adaptive array module. Vector V10 has nominal coverage angles of 110° horizontal and 10° vertical. The compact and lightweight enclosure houses a slot loaded 10” cone driver with neodymium magnet structure to cover the 55 – 200 Hz pass band, and two 5” cone drivers vertically aligned to cover the 200 -2 KHz pass band. The high frequency range is covered by two 1” exit ring radiators, mounted on a ‘Vector guide’, planar wave unit, which is centrally mounted in the enclosure. The components are passively combined with a low insertion pad free passive network working in hybrid mode with a system amplifier from the Eflex range.
The enclosure is manufactured from
15 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water-resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. The cabinet end cheeks have three Kwik Lok pin housings which allow for the attachment of a yoke, or facilitate box to box connection. The rear of the cabinet end cheek has a slot handle to assist handling of the enclosure.
The enclosure is manufactured from 15 mm birch plywood and coated in a heavy duty polyurea finish. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface. The cabinet end cheeks have three Kwik Lok pin housings which allow for the attachment of a yoke, or facilitate box to box connection. The rear of the cabinet end cheek has a slot handle to assist handling of the enclosure.
Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors. Inspired Audio products are designed as an integrated solution complete with system amplifier options from the Eflex range. The Eflex units provide DSP preset functions, networked software control of operating parameters and output drive power. A single output channels from an Eflex Q5, or Q6 will drive three Vector V10 enclosures, while a single output channel of an Eflex Q20 will drive four enclosures.
The Vector V10 can be used full-range for audio visual applications, or combined with the Reflex B118 for applications requiring an extended low frequency response. The Vector V10 can be combined with the Vector V20 in a vertical array and powered from a common Eflex amplifier channel, as the enclosures share a common DSP preset function.
Bass:
1 off 10″ cone driver
Mid:
2 off 5″ con drivers
HF:
2 off 1″ exit ring radiator
Frequency response:
55 Hz – 20 kHz
Sensitivity: 1w/1m (Peak):
Bass – 96 dB (127 dB)
Mid – 102 dB (131 dB)
HF – 115 dB (137 dB)
Power (RMS/Peak):
Bass – 300 w (1000 w)
Mid – 180 w (720 w)
HF – 70 w (280 w)
Impedance:
8 ohms
Directivity: (above 2kHz)
10° v x 110° h
Operation mode:
Passive
Connection:
2 off Neutrik NL4 MP linked
Wiring protocol (passive):
1+/1- = Input
2+/2- = N/C
Weight:
22 kg
Dimensions (mm):
507w x 312h x 450d
Array Element
The Vector 10 is a compact constant curvature vertically arraying loudspeaker enclosure.
Ground Stacked Bass
The Reflex B118 is a high power single 18″ bass enclosure.
System Amplification
The eFlex range of advanced DSP amplifiers powers our entire product range.
Inspired Audio
Bay 2, The Handling Factory,
Derby Road Business Park,
Clay Cross,
Derbyshire,
S45 9AG