Product Overview
The IQ12 is a compact point source loudspeaker enclosure for installation.
• Components: 1 x 12″ / 1 x 1″
• Frequency Response: 55 Hz – 20 kHz
• Directivity: 90° h x 40° v
• Max SPL: 130 dB
• Weight: 21 kg
Compact point source installation enclosure
The IQ12 is a compact point source loudspeaker enclosure for installation.
• Components: 1 x 12″ / 1 x 1″
• Frequency Response: 55 Hz – 20 kHz
• Directivity: 90° h x 40° v
• Max SPL: 130 dB
• Weight: 21 kg
The IQ12 is a compact full range foreground speaker for fixed installation. The cabinet houses a 12″ mid/bass cone driver with a ceramic magnet structure which is combined with a 1″ exit compression driver mounted on a 90° x 40° constant directivity horn flare. The flare can be rotated to allow installation in either landscape or portrait modes. The cabinet has a low insertion passive network which can be used with an Eflex system amplifier to optimise performance or with third party amplification if required.
The enclosure is manufactured from 15 mm birch plywood and coated in a water based textured paint finish which is available in either black or white color options. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface.
The IQ12 incorporates three bracket points located on the cabinet rear panel, top panel and side panel. It also has twelve M10 insert points to further aid installation options.
Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors. While the IQ series is supplied as an open platform product which can be used with third party amplification it is recommended that it is used with the Eflex Q5 system amplifier. The Eflex units provide DSP preset functions, networked software control of operating parameters and output drive power. An Eflex Q5 will drive two IQ12 enclosures per output channel.
Alternatively Inspired Audio offer the ID48 four input eight output DSP controller that can be used as a control interface on installed systems.
The IQ12 can be combined with bass options from the Reflex product range to enhance bass response within an integrated installed system.
Mid/Bass:
1 off 12″ cone driver
HF:
1 off 1″ exit compression driver
Frequency response:
55 Hz – 20 kHz
Sensitivity: 1w/1m (Peak):
98 dB (130 dB)
Power (RMS/Peak):
400 w (1600 w)
Impedance:
8 ohms
Directivity:
90° h x 40° v
Operation mode:
Passive
Connection:
2 off Neutrik NL4 MP linked
Wiring protocol:
1+/1- = Input
2+/2- = Linked
Weight (Packaged):
17.4 kg (19 kg)
Dimensions (mm):
375w x 600h x 320d
Full Range
The IQ12 is a compact installation full range 12″ loudspeaker enclosure.
System Amplification
The Eflex range of advanced DSP amplifiers powers our entire product range.
Inspired Audio
Bay 2, The Handling Factory,
Derby Road Business Park,
Clay Cross,
Derbyshire,
S45 9AG