IQ8

Compact point source installation enclosure

Previous
Next

Product Overview

The IQ8 is a compact point source loudspeaker enclosure for installation. 

 

• Components: 1 x 8″ / 1 x 1″

• Frequency Response: 70 Hz – 20 kHz
• Directivity: 90° h x 60° v
• Max SPL:  125 dB
• Weight: 12 kg

  • Description
  • Specification
  • Downloads
  • Elements

IQ8 Product Description

The IQ8 is an ultra-compact full range background speaker for fixed installation. The cabinet houses an 8″ mid/bass cone driver with a ceramic magnet structure which is combined with a 1″ exit compression driver mounted on a 90° x 60° constant directivity horn flare. The flare can be rotated to allow installation in either landscape or portrait modes. The cabinet has a low insertion passive network which can be used with an Eflex system amplifier to optimise performance or with third party amplification if required.

 

The enclosure is manufactured from 15 mm birch plywood and coated in a water based textured paint finish which is available in either black or white color options. The cabinet front has a protective steel grill coated in a water resistant powder coat finish which has an acoustically transparent filter medium bonded to its back surface.

 

The IQ8 incorporates three bracket points located on the cabinet rear panel, top panel and side panel. It also has eight M10 insert points to further aid installation options.

Electrical connection to the cabinet is via two parallel linked Neutrik NL4 MP connectors. While the IQ series is supplied as an open platform product which can be used with third party amplification it is recommended that it is used with the Eflex Q5 system amplifier. The Eflex units provide DSP preset functions, networked software control of operating parameters and output drive power. An Eflex Q5 will drive four IQ8 enclosures per output channel.

 

Alternatively Inspired Audio offer the ID48 four input eight output DSP controller that can be used as a control interface on installed systems.

 

The IQ8 can be combined with bass options from the Reflex product range to enhance bass response within an integrated installed system.

Made In Britain 300px WHT

IQ8 Specification

Mid/Bass:
1 off 8″ cone driver


HF:

1 off 1″ exit compression driver


Frequency response:
70 Hz – 20 kHz


Sensitivity: 1w/1m (Peak):
94 dB (124 dB)


Power (RMS/Peak):
230 w (920 w)


Impedance:
8 ohms


Directivity:
90° h x 70° v


Operation mode:
Passive


Connection:
2 off Neutrik NL4 MP linked


Wiring protocol:
1+/1- = Input
2+/2- = Linked


Weight (Packaged): 

9.5 kg (10.1 kg)


Dimensions (mm): 
255w x 425h x 230d

IQ8 Downloads

Specification Sheet

2D CAD

3D CAD

IQ8 Elements

IQ8

Full Range

 

The IQ8 is a compact installation full range 8″ loudspeaker enclosure.

Eflex Q5

System Amplification

 

The Eflex range of advanced DSP amplifiers powers our entire product range.