Product Overview
The DM 1000 power amplifier has been designed to power the CK series KTV loudspeakers within a fixed room installation.
• Channels: Two
• Power: 1000 w stereo power @ 8Ω
• Inputs: Analogue
• Interface: Front panel
• Weight: 18.2 kg
Power amplifier designed for CK series KTV loudspeakers
The DM 1000 power amplifier has been designed to power the CK series KTV loudspeakers within a fixed room installation.
• Channels: Two
• Power: 1000 w stereo power @ 8Ω
• Inputs: Analogue
• Interface: Front panel
• Weight: 18.2 kg
The DM 1000 power amplifier has been designed to power the CK series KTV loudspeakers within a fixed room installation. Offering 1000 w into 8 ohms and 1350 into 4 ohms, the DM1000 will drive a pair of CK10, CK12, or CK312 enclosures per channel, For full technical specification please refer to the specification sheet.
Height:
88 mm
Width:
482 mm
Depth:
366 mm
Net Weight:
18.2 kg
Gross Weight:
20.5 kg
8 Ohms Stereo Power:
1000w
4 Ohms Stereo Power:
1350w
8 Ohms Bridged Stereo Power:
2700w
Voltage Gain:
36dB
Damping Factor:
400:1
Slew rate::
>20V/ us
Input CMRR (@ 1 KHz):
>60dB
Frequency response:
20 Hz – 20 kHz
Hum and noise:
>100dB
Input Sensitivity:
0.775V(1, 0V, 1, 4V) for rated power
Input Impedance:
>20k Ohms, balanced > 10kOhms, unbalanced
Crosstalk:
60dB
THD+N:
<0.5%20Hz – 20kHz
Connectors(per channel):
Input (XLR balanced, RAC unbalanced) Output (Blinding post, speakon)
Power Supply:
220V-230V/50Hz-60Hz
Cooling:
Two(2) variable speed DC fans
Controls:
Mode Selection switch, input sensitivity switch
Indicators(per channel):
Protect led, clip led, signal led, power led
Protection:
Temperature, DC, sub/ulfea-sonic, short circuit, IGM, output